RR1168: Gas dispersion model DRIFT 3.6.14: modelling the dispersion of flammable vapour
HSE uses gas dispersion modelling in its assessment of the hazards and risks posed by toxic and flammable substances stored at major hazards sites. To update its dispersion modelling capability, HSE commissioned ESR Technology to develop a new version of the gas dispersion model DRIFT. The new version, DRIFT 3, includes a significant number of modelling enhancements over the version previously used within HSE (DRIFT 2.31). These include the extension of the model to treat buoyant plumes and time varying releases. Before DRIFT 3 is adopted for use by HSE, it must undergo thorough evaluation and assessment for a range of release scenarios. The initial phases of the DRIFT 3 testing programme used DRIFT 3.6.4 and are described in reports RR1100 and RR1101. Further testing is described in four reports including this one: RR1165, RR1166, RR1167 and RR1168. The four reports cover the evaluation of the model and assessment for a range of scenarios using the enhanced version DRIFT 3.6.14.
This report describes an assessment of the performance of DRIFT 3.6.14 for modelling the dispersion of flammable vapour. The assessment is for three release scenarios: vapour evolved from pools of flammable liquids, flashing jet releases of flammable substances, and instantaneous flashing releases of flammable substances. These scenarios are typically used by HSE to assess Hazardous Substances Consent applications and set Land Use Planning zones around major hazards sites and pipelines. This report describes sensitivity tests which show that DRIFT 3.6.14 works reliably for these scenarios. As a result of this assessment and accompanying model evaluation (see RR1165), DRIFT 3.6.14 has been adopted by HSE to model the dispersion of flammable vapour for these three release scenarios.
The Research Report Series are produced in Adobe Acrobat. The use of the latest version of the software is recommended which is available at the Adobe website via the link on this page.
Assistance in the use of Adobe Acrobat PDF files is available on our FAQs page.