HSE Information documents - Engineering

Engineering - Section 1

• ID 234/16 Safe use of magnetic lifting devices
• ID 267/3 Hazards from the use of refractory ceramic fibre
• ID 447/3 Health surveillance for the spraying of isocyanate paints in motor vehicle refinishing
• ID 483/27 Oil filled electrical distribution and other switchgear
• ID 803/58 Vehicle finishing units - risks from gross leakage of fuel
• ID 803/69 The application of the Provision and use of Work Equipment regulations 1998 and the Lifting Operations and Lifting Equipment Regulations 1998 to motor vehicle repair

Engineering - Section 2

• ID 288/6 Rev Asphyxiation hazards in welding and allied processes
• ID 564/6 Rev Storage and use of thoriated tungsten electrodes
• ID 634/7 Direct pressure blasting equipment
• ID634/8 Control of dust and noise exposure during direct pressure blasting
• ID 652/1 Post weld cleaning using pickling paste
• ID 668/21 Welding and other electric arcs - alleged hazard to wearers of contact lenses
• ID 668/22 Plasma cutting: Control of fume, gases and noise
• ID 668/23 Safeguarding of resistance welding machines
• ID 668/25 Personal protective equipment for welding and allied processes: practical guidance on assessment and selection
• ID 668/26 Positioning equipment for manual and automatic welding: Specialised machinery such as column and boom, rotators, and positioners
• ID 668/27 The safe use of oxy-propane preheating torches
• ID 668/29 Control of fume arising from the electric arc welding of stainless steels
• ID 668/30 Oxy-fuel gas cutting: control of fume, gases and noise
• ID 605/48 Storage racks for cable drums
• ID 730/9 Storage and use of oxygen and fuel gases on board ships under construction and repair
• ID730/11 Temporary electrical installations in shipbuilding and ship-repairing
• ID 730/12 Staging around ships and boats in build and repair yards
• ID 730/13 Application of surface coatings to ships tanks
• ID 730/15 Safe use of tin-free, marine anti-fouling coatings